The Diestco Manual Wheelchair Cover helps to protect your wheelchair from moisture, dirt, and dust while it's in storage or being transported. This manual wheelchair cover is made from 400-denier nylon with a urethane backing and is both durable and lightweight, making it easy to take on and off your device as needed.

Simply slip the cover over your wheelchair and then secure it using the locking drawstring at the bottom. The cover also has grommets (ringed holes) where you can further secure the cover using an elastic cord or bungee cord.

Please note that this wheelchair cover will need grommets with a drawcord and cord lock to tighten it. Please also note that, depending on the size of your wheelchair, the cover may not completely fit over the wheels.

Features:

NOTE: This wheelchair cover is not intended to be used on the highway without the use of a securing device (e.g. rope or bungee cords). We recommend minimizing excess room under the cover to prevent the cover from billowing up at high speeds. The life of the cover may be adversely affected if your cover is flapping excessively at high speeds.

Slip the cover over your manual wheelchair and pull the elastic down under your chassis. Pull the cord lock to make sure it is tight around the bottom. For additional security, tie the bottom of the cover down by hooking bungee cords (not included) through the bottom grommets or belt loops.

Shop for manual wheelchairs online.