Diestco Powerchair Covers help to protect your electric wheelchair from moisture, dirt, and dust while it's in storage or being transported. These powerchair covers are both durable and lightweight, making them easy to take on and off the device as needed.
Simply slip the cover over your electric wheelchair and then secure it using the locking drawstring at the bottom. The cover also has grommets (ringed holes) where you can further secure the cover using an elastic cord or bungee cord.
The following statements are intended to be used as guidelines for deciding which cover will suit your device best. Please note that this Standard cover will need grommets with a drawcord and cord lock to tighten it. Please also note that, depending on the vehicle, the cover may not fit over the powerchair wheels.
Features:
- Easy to take on and off the powerchair
- Made from 400-denier nylon with a urethane backing
Fabric information:
Standard: 400-denier nylon with a urethane backing. Standard covers have grommets and a locking drawstring to tighten.
Heavy Duty: 600x300 polyester with PVC rubber backing. Heavy duty covers have a 1" webbing belt that goes through belt loops to tighten.
Below are general guidelines on matching a Diestco Cover to some popular powerchair models (models may vary):
- V1300/V1311/V5311/V7311: Regular Size
- Pride Go Chair
- Golden Technologies LiteRider Envy
- WHILL Model Ci
- WHILL Model A
- V1320/V1321/V5321/V7321: Tall Size
- Smaller powerchairs with full-sized seats
- V1330/V1331/V5331/V7331: Large Size
- Jazzy Select
- Jazzy Select 6 2.0
- Jazzy Select 6
- Jazzy Select Elite
- Jazzy Elite ES
- Jazzy Elite ES-1
- Jazzy Elite ES Portable
- Jazzy Elite 14
- Jazzy 600 ES
- V1340/V1341/V5341/V7341: X-Large Size
- Pride Jazzy Air 2
- Drive Titan AXS Mid-Wheel
- Golden Technologies Alante Sport
- Golden Technologies Compass Sport
- V1350/V1351/V5351/V7351: Super Size
- Pride Jazzy 1450
- Pride Jazzy 614HD
- Pride Jazzy Elite HD
NOTE: This powerchair cover is not intended to be used on the highway without the use of a securing device (e.g. rope or bungee cords). We recommend minimizing excess room under the cover to prevent the cover from billowing up at high speeds. The life of the cover may be adversely affected if your cover is flapping excessively at high speeds.
Slip the cover over your electric wheelchair and pull the elastic down under your chassis. Pull the cord lock to make sure it is tight around the bottom. For additional security, tie the bottom of the cover down by hooking bungee cords (not included) through the bottom grommets or belt loops.
Shop for electric and power wheelchair models online.
Rent
0 
0 
